Monthly Archives: May 2012


The 2012 ‘Road Respect, Cars and Bikes Rules to Live By’ tour will kick off on Sunday, June 3.

2011 Riders on the Road Respect tour -- The Road Respect message is being heard in Utah. A statewide survey shows that 43% of respondents are aware of the Road Respect program and of those respondents, 96% are aware of the Road Respect message.

Join the Department of Public Safety, UDOT and Bike Utah as a group of 30 experienced cyclists get ready to ride 518 miles in six days to spread an important safety message: Respect is a two-way street. When you give respect, you get respect. And that message is especially true on Utah’s roads where drivers and cyclists meet in potentially life-threatening situations thousands of times a day.

WHEN: Sunday, June 3, 2 p.m.
WHERE: 250 South, 600 West, at the Salt Lake City Intermodal Hub, also known as UTA’s Central Station, in the circle.

The ‘Road Respect, Cars and Bikes Rules to Live By’ program is a grassroots safety campaign that aims to educate drivers and cyclists about the rules of the road and encourage mutual respect so that everyone gets home safely. This event will be the first of many throughout the state. Touring cyclists will be joined by Shelby Cobra replica cars along the way. And, some of the events feature mini car shows.

‘Road Respect’ cyclists are touring the state and seeking to be a positive influence on people who ride and drive. Cyclists on the tour serve as a ‘moving billboard’ that demonstrates how to follow the Rules of the Road.

The Road Respect message is being heard in Utah. Last year, a statewide survey shows that 43% of respondents were aware of the Road Respect program and of those respondents, 96% were aware of the Road Respect message.

Speakers at the event will include:

  • Matt Sibul, Chief Planning Officer, Utah Transit Authority
  • Colonel Daniel Fuhr, Superintendent, Utah Highway Patrol
  • Carlos Braceras, Deputy Director, Utah Department of Transportation
  • Scott Lyttle, Executive Director, Bike Utah

For more information about the tour, visit the Road Respect website or contact Keri Gibson at 801 243-7571 or


UDOT is improving the safety in a location that has recently seen some tragic crashes.

State Route 201 meets SR 202 in Tooele County.

State Route 201 meets SR 202 in Tooele County. Traffic on SR 201 can be fairly heavy and fast while traffic on SR 202 is very light. Crashes that occur at the location tend to be severe due to the speeds on SR 201 and the angle of the crashes. Motorists going both directions are sometimes surprised by slower traffic entering from SR 202, and when crashes occur, cars on SR 201 hit oncoming traffic at an angle.

Alex Fisher is an intern at UDOT

A UDOT intern has researched a way to warn motorists on both routes to be aware of oncoming traffic. Her research is seeing fruition – new signs with auto-activated warning signs with flashing lights will be installed soon.

Alex Fisher is an intern soon to be Rotational Engineer at UDOT. Her assignment to find improvements for SR 201 and 202 led her to look at research done by engineers in Missouri. In an intersection with similar characteristics, auto-activated signs resulted in 51 percent reduction in crashes and a 77 percent reduction in sever angle crashes. Since Missouri has similar specifications for intersection configuration, speed and signs, Fisher believed auto-activated warning signs would work in Utah too.

Fisher proposed using LED stop signs on SR 202 and LED message signs on SR 201. UDOT Central Traffic and Safety liked her proposal and has designed the project.

Sign operation

Radar detection will trigger the lights on the signs to activate when traffic is approaching. The stop signs on SR 202 have LED lights on the perimeter. Under the stop sign, a LED message sign will display the text “cross traffic does not stop” when traffic is approaching. On SR 201, message signs with the words “watch for entering traffic when flashing.”

According to UDOT Region Two Traffic Engineer Robert Miles, Fisher did an excellent and thorough job with her research and proposal. The project was handed off to Rotational Engineer Brandon Weight for design. Check back to see an update of the project after construction.


UDOT is developing a GIS backbone for sharing and viewing information about the state’s transportation system.

This screen shot shows the straight line diagram component of the Explorer Application. Designed to have broad utility, the application helps us display linear relationships which can be hard to view in a typical map.

UGate is a robust data repository that is automatically populated by many data base systems already in place. Once uploaded to UGate, data can be integrated with other information and accessed by end-users via web application portals like UPlan.

The big picture

The effort is allowing UDOT’s information to be less fragmented and “more consistent and concerted,” says Frank Pisani who heads the Enterprise GIS Team. Stand-alone databases exist in many forms all departments ac cross UDOT. Now, layers of information, such as future and past projects, bridge inspections, pavement quality, can be viewed together to give a more complete picture of the state’s transportation system.

As an illustration, Electric Program Management is a database used to track project funding, scheduling and staffing. Currently, ePM automatically uploads to UGate and along with other information, is part of Transparency In Government Spending, an application portal that lets end users see the ePM information integrated with an interactive map (like the example below) and query tools.

Department of Technology Services programmer Ruben Schoenefeld is on the UGate development team. He points out that having a data set on display via a web-based application instead of a spreadsheet or other stand-alone form has  advantages. Quality control can be managed more easily. “Even though it may be scary for the data owners to put their data ‘out there’ for others to see, they profit from it by getting feedback.”

View Larger Map

Successful data integration

Data collection needs to be web-based in order to auto-feed into UGate. Culvert inspection data, for example, will soon be collected via smart-phone. The GIS capability of smart phones will make data upload seamless, not to mention easy and accurate.

Besides TIGS, “there are now multiple applications that use that structure,” says Schoenefeld, naming Highway Reference Online as another example. Once a feature of the UGate system is put in place, multiple applications can take advantage of that feature. The interactive map is one example.

Schoenefeld has enjoyed being part of the effort to improve the way data can be used. “It’s fun to see it all come together,” he says.

Learning the system that creates features like the interactive map has been challenging for programmers. But the promise of integrated data in a system that will have years of utility for UDOT is worth the effort. Pisani believes UGate is a “web tier delivery architecture that we feel can accommodate future changes in technology.”
Getting the word out

Steve Quinn, UDOT Director of ePM and ETS and Pisani are planning to take the message on the road – visits to the UDOT Regions are being planned for this summer. Both are anxious to show what GIS can do to help improve the way UDOT builds and maintains the state’s transportation infrastructure.


Presentations give insight on the design of Diverging Diamond Interchanges.

A group of engineers gathered for a lessons-learned discussion and tour of UDOT Diverging Diamond Interchanges. Participants listened to presentations given by Richard Miller, with Parsons Transportation Group lead designer of the Pioneer Crossing DDI, HG Kunzler with Lochner Engineering who designed the retrofit DDI at SR 201 and Bangerter Highway and  Michael Lasko with CH2M Hill who designed the SR 92 DDI. View each of the presentations here.

The event was held to coincide with a visit by Gilbert Chlewicki, a nationally known expert and proponent of the DDI. Though it’s “not a silver bullet” that will solve any traffic problem, Chlewicki believes the design is best used in an urban or suburban environment. In fact, Chlewicki predicts that the design should be considered first in an urban or suburban environment and will “make the SPUI extinct.”

UDOT has four DDIs, each built to meet mobility needs in their respective locations. According to UDOT’s Mark Taylor, Signal Systems Engineer, DDI’s have the following advantages:

DDI’s are more efficient because of fewer phases.  “Cars on the red have to wait for one phase instead of three.  Why, because left turns are eliminated.  Eliminating left turns mean that the green time that you would normally give to the left turn can be given to other movements.  Eliminating and shortening left turn green time is usually always more efficient for the overall intersection.”

DDI’s are safer.  “There are fewer conflict points for vehicles.  A conflict point is where conflicting movements would collide if every direction had a green.  A diamond interchange contains 30 conflict points.  A Single Point Urban Interchange (SPUI) has 24.  A DDI has only 18.  Fewer conflict points are safer.”

Glen Blackwelder with UDOT Region Three gave this presentation on DDI Operations:


A newly completed capacity project will provide better north-south mobility for road users in Utah County.

“When you only have three north-south corridors in the county, it’s a central piece,” said UDOT Region Three Director Shane Marshall at a celebration of the project’s completion.

Geneva Road is one of three major north-south corridors in the area, which made the road widening project a priority for UDOT and Utah County officials. “When you only have three north-south corridors in the county, it’s a central piece,” said UDOT Region Three Director Shane Marshall at a celebration of the project’s completion sponsored by Kiewit Western Co. Utah County provided some funding for the project, which along with other funding, allowed UDOT to build sooner than expected.

Utah State Representative Brad Daw praised UDOT and the contractor for building the road quickly while maintaining a high quality project. “UDOT knows how to get the most road for the dollar,” he said. The project was bid as a Design-build contract, which allows construction and design processes to take place simultaneously. The advantages of this method are speed of completion and low cost. Finding the balance point with Design Build requires an open relationship with the contractor to achieve a best value project.

The new pedestrian-friendly five lane facility between University Parkway and 1600 North in Orem can now provide a needed alternate route for the duration of the I-15 CORE project, scheduled for completion in December 2012; three nearby interchanges will require closures between now and the end of the project. Located just west of I-15, Geneva Road has good connectivity to the freeway to allow road users to get around the interchange closures.

Another benefit of the project is the new bridge that carries Geneva Road over Union Pacific and Frontrunner rail lines at 400 South. Before the bridge was built, traffic could be backed up several minutes many times a day waiting for a train to pass.Commissioner Larry Ellertson from Utah County pointed out the advantage at the celebration. “Doesn’t it look great to see those cars continue to move across that rail road?”

Building and designing the project took expertise and careful partnering. “For an urban facility, it was challenging,” said Lead Designer Russell Clark with Parsons Corporation. The bridge at 400 South required a high skew. Maintenance of traffic was also tricky – the design accounted for all traffic movements that were in existence before the bridge was built.

The location is a “utility corridor,” according to Clark and had a high number of conflicts for a project of its size. Over 8 hundred utility conflicts were identified and moved or protected in place.

The soils in the area presented a geo-technical challenge as well. Over two-thousand telephone poles were hammered into the ground to provide soil stability and support for the bridge, and geo-membrane was used extensively.

After the I-15 CORE project concludes, the road will continue to support future mobility and economic vitality. Major growth in the area includes an extension of the UVU campus and an 18-hundred acre commercial and residential development. Daw said that the project is an example of how new roads help business and residential developments flourish. “It just helps everyone in the community.”

Click to see a slide show of the road in the Provo Daily Herald.


For the last three months, transportation planners have been asking Utahans how, when and where they travel.

The Utah Travel Study will help planners prioritize highway and transit projects for the 30-year long range transportation plan.

Sponsored by six agencies, including Metropolitan Planning Organizations and UDOT, the Utah Travel Study has contacted more than five thousand households across Utah so far. Over eight thousand college students have also participated. And this summer, a special bicycle and pedestrian survey will collect information to help planners “understand more about bike and walk travel behavior and needed improvements in Utah,” says Elizabeth Greene, with Resource Systems Group, Inc. Research firms RSG and Westat, are administering the survey on behalf of the sponsoring agencies.

The survey asks participants to provide basic demographic and vehicle information, including the number and characteristics of adults and children and number and type of vehicles available in the household. Participants are also asked to report information about trips made in one 24-hour weekday period and answer questions about transportation priorities.

Once compiled, the database will help planners prioritize highway and transit projects for the 30-year long range transportation plan. UDOT and other transportation agencies spend billions of dollars on highway and transit projects, and the data gathered by the survey will help planners ensure that money is well spent.

All six sponsoring agencies will have access to the database for planning and research. The data base will not include personal information – such as names or contact information – of the respondents. Some of the results will be published as a brief report so sponsoring agencies can share what they’ve learned with the public.

“Travel demand modelers, transportation planners, and policy-makers across the state of Utah will all analyze the data as part of their jobs,” explains Greene. “The first and foremost goal is to understand travel patterns and travel needs in order to best plan for future transportation improvements and investments.”

UDOT and other transportation agencies “really values the participation of Utahan’s from across the state.”  It’s important to hear from everyone who is contacted. Only by hearing from everyone can the state of Utah best understand the overall travel patterns and travel needs in the state and thereby best plan improvements and investments in the future,” explains Greene.

“To prepare for the Olypmic Games ten years ago, Utah invested heavily in transportation projects. Since then, development of our transportation system has continued, benefiting our economy, safety, and quality of life,” says UDOT Director John Njord. ” The Utah Travel Study will help UDOT in making decisions about future investments as we continue to develop our transportation system while preserving our existing assets and infrastructure.”

Data collection will continue throughout the summer.


UDOT Project Manager Jim Golden and UDOT Engineer for Technology and Support Brent Gaschler

The Federal Highways Administration and UDOT will partner to study an innovative method for compacting pavement.

Proper compaction of asphalt pavement is critical when building or reconstructing roads. Without proper uniform compaction, differential settlement can lead to cracking and water intrusion can cause breaks and potholes, and overall, both conditions can shorten pavement life.

UDOT and FHWA will study the use of Intelligent Compaction equipment this summer on a project on US 89 and SR 180 in UDOT Region Three. The purpose of the study is to relate IC measurements to nuclear gauge or coring density tests to demonstrate how the system can be used for improved quality control and quality assurance.

IC systems are similar to regular compactors equipped with GPS to determine the location and number of passes, sensors to determine the increasing stiffness of the pavement. As the compactor makes passes, the GPS and stiffness measurements are integrated to a digital display that gives the operator a comprehensive real-time picture of the compaction process. All information is recorded and can be downloaded for review by the project owner.

Core samples of the HMA will be taken “to see the correlation between stiffness and density” and demonstrate the value of this tool for QA/QC, says Brent Gaschler, UDOT Engineer for Technology and Support, who is working with FHWA to coordinate the effort. The demonstration of the IC method will take place during four days in late July or early August at the contractor’s discretion.


Three projects in Riverton City will improve traffic mobility for residents and businesses.

Crews place asphalt base for new concrete pavement on 13400 South in Riverton, Utah.


A new section of the Mountain View Corridor will open soon between 12600 South to Rosecrest Drive at 14400 South. That road, along with other improvements made by UDOT and Riverton City, will help ease traffic flow in the busy, growing community. Nearby projects include a wider road on 13400 South between the Mountain View Corridor and Bangerter Highway and a Continuous Flow Intersection at Bangerter Highway and 13400 South.

The projects will improve mobility and support economic vitality. Riverton City officials believe that “unique proximity to existing or planned major transportation infrastructure, including the Bangerter Highway, Mountain View Corridor, and transit” position the city for future economic growth, according to the city’s website.

A recent KSL News article about the MVC opening quoted resident Matt Thompson who lives nearby as being hopeful that the new road will reduce traffic noise and improve safety in his neighborhood.  “I think a lot of people are looking forward to having the extra access to be able to get around at a little higher speed instead of having to cut through neighborhoods.”

Riverton City is widening 13400 South to include three travel lanes in each direction, a long-lasting concrete on asphalt driving surface, better drainage, a reconfigured intersection at 4150 West, better street lighting and traffic signals and sidewalks. Reconstruction started in mid-February and is expected to continue through late summer.

CFIs along Bangerter highway have helped enhance east-west travel from West Valley to Riverton. The innovative design was first introduced on 3500 South in 2007. CFI’s provide more green-light time by and can increase the number of cars moving through an intersection by up to 70 percent.


Utah County’s first CFI is on the fast track.

UDOT has been busy converting a regular intersection to a Continuous Flow Intersection on University Parkway and Sandhill Road as part of the I-15 CORE Project. The intersection is used by nearly 70 thousand cars per day. Converting it to a CFI will improve the flow of traffic by 20 percent and improve safety for drivers turning left from University Parkway onto Sandhill Road.

The opening of the new intersection is another significant milestone as I-15 CORE progresses toward completion in December.The project is being built on an accelerated schedule and will be completed on Tuesday, May 22 after one month 0f construction.

“With a three-day closure scheduled to begin Friday night, construction on University Parkway will get worse before it gets better,” said UDOT spokesperson Mindy Nelson. “It will all be worth it when the new continuous flow intersection opens on Tuesday, and east/west drivers will see more green lights.”

UDOT encourages drivers to learn how to drive the intersection before it opens on Tuesday by viewing a new tutorial.

UDOT is working hard to reduce traffic delay by making the current system work more efficiently and by increasing capacity where appropriate. Individual drivers can also make choices that can help save time, use less energy and reduce traffic congestion. Visit the TravelWise website to investigate some effective strategies like trip-chaining and alternative work schedules.


UDOT is currently developing the Disadvantaged Business Enterprise (DBE) goal for the next three Federal fiscal years. 

The purpose of the federal government’s DBE program is to increase the number of women and minority businesses active in the highway construction industry.

The proposed DBE goal can be found on the UDOT website. Comments may be provided to UDOT by following the directions on the website.   The document will be available for review from May 15th through June 20, 2012 and comments will be accepted through July 1, 2012.

Only comments related specifically to the DBE goal and the development of the goal will be accepted.  All other UDOT or DBE-program related comments should be directed to the appropriate contact provided on the main UDOT website.

The purpose of the federal government’s DBE program is to increase the number of women and minority businesses active in the highway construction industry. The UDOT DBE Program is funded in part by FHWA. By cooperating with community partners, UDOT can help open the door to growth of small businesses, and in turn, those businesses can contribute to the economic well-being of the state.

UDOT is actively seeking to promote stakeholder participation by seeking comments on the DBE goal so that continued success within the program is maintained.